Technical data sheet
REMOVING AND CARRYING THE OUTBOARD MOTOR50
8
z Do not carry or store outboard motor in
any of positions described below.
Otherwise, engine damage or property
damage could result from leaking oil.
Keep the outboard motor in a vertical posi-
tion when carrying.
The optional outboard motor stand is rec-
ommended for keeping the outboard
motor vertical both during transport and
storage.
ENON00021-A
Note
z If the outboard motor must be laid down
be sure drain the fuel and engine oil,
then the port side faces down as shown
in the drawing below.
z Elevate power unit 2 inches to 4 inches if
traveling to avoid oil spillage.
ENOM00072-A
ENOW00072-0
Trailering in the tilted position may cause
damage to the outboard motor, boat, etc.
ENOW00073-A
Be sure to disconnect fuel connector
except when operating engine.
Fuel leakage is a fire or explosion hazard,
which can cause serious injury or death.
ENOW00068-0
Close air vent screw of fuel tank and fuel
cock before carrying or storing outboard
motor and fuel tank, or fuel may leak,
potentially catching fire.
ENOF01219-1
ENOF01220-1
3. Trailering
CAUTION
WARNING
WARNING
ENOF01221-1
ENOF00075-1
0)6(B(85B(1B1ERRN࣮࣌ࢪ㸰㸮㸯㸴ᖺ㸯㸯᭶㸯㸶᪥ࠉ㔠᭙᪥ࠉ༗๓㸯㸮㸯㸴ศ