Technical data sheet
ENGINE OPERATION 35
7
(For electrical starter type)
4. Push the starter switch button and
release the button when the engine
has started.
1. Starter button
5. Check the cooling water from cooling
water check port.
Side mount RC type
1. Be sure to install the stop switch lock
to the stop switch, and attach the stop
switch lanyard securely to the operator
or to the operator's PFD (Personal Flo-
tation Device.)
1. Stop switch lock
2. Insert the main switch key.
3. Set the control lever in the Neutral
position.
ENON00504-1
Note
The free accel lever can not be raised when
the control lever is in Forward or Reverse.
1. Neutral (N)
2. Control lever
3. Fully open (Forward)
4. Fully open (Reverse)
5. Free throttle lever
6. Main switch key
7. Stop switch
4. Turns the main switch key to START
position.
1. ON
2. START
3. OFF
ENOF00315-1
1
ENOF01212-1
1
ENOF00869-0
N
R
F
1
2
3
4
5
6
7
ENOF00870-0
1
2
3
ENOF00871-B
0)6(B(85B(1B1ERRN࣮࣌ࢪ㸰㸮㸯㸴ᖺ㸯㸯᭶㸯㸶᪥ࠉ㔠᭙᪥ࠉ༗๓㸯㸮㸯㸴ศ