Technical Specifications

4
4
SnapSkru SELF-DRILLING DRYWALL ANCHORS
• In 5/8" drywall the SnapSkru SP self-drilling drywall anchor holds over 135 lbs.* ultimate.
This is 80% more than the highest load reported by other self-drilling drywall anchors.
• In 1/2" drywall the SnapSkru SP self-drilling drywall anchor holds over 80 lbs.* ultimate.
This is 60% more than the highest load reported by other self-drilling drywall anchors.
• The SnapSkru SP self-drilling drywall anchor accepts #6, #8 and #10 screws.
The SnapSkru MINI self-drilling drywall anchor accepts #6 and #8 screws.
Other self-drilling drywall anchors do NOT accept this large a range of screw sizes.
• SnapSkru self-drilling drywall anchors have a built-in “positive-stop” that prevents
overdriving the anchor when using a screw gun or hand drill.
It is easy to drive other self-drilling anchors through the drywall; they have NO stop.
• SnapSkru self-drilling drywall anchors activate with an audible sound, providing positive
feedback that they are installed correctly. You can actually hear the anchor “pop” open
and lock on the backside of the wall.
Other self-drilling drywall anchors give NO indication they have been properly installed.
• SnapSkru self-drilling drywall anchors resist vibration and shock.
Other self-drilling anchors cut the drywall and pull loose when vibrated or shocked.
Other self-drilling drywall anchors do NOT lock in the wall.
• SnapSkru self-drilling drywall anchors do not back out of the wall when the screw is
removed. You can remove the screw, leaving the anchor safely in the wall, and then later
reinstall your fixture in the same anchor with the same screw. Yet, the anchor itself can be
safely backed out of the wall, when one chooses, without destroying the wall.
Other self-drilling anchors pull out of the wall with the screw, destroying the wall.
• It takes a much greater amount of work or energy to remove a SnapSkru anchor
from the wall during tensile load testing. This means a much safer installation.
For example, it takes 20 times MORE work or energy to remove the SP anchor totally
from the wall during tensile loading than it takes to remove the competition’s anchor.
• SnapSkru anchors are designed and manufactured in the U.S.A. Each anchor proudly
bears the TOGGLER name and carries a 100% money back satisfaction guarantee.
Most other self-drilling drywall anchors have NO name. Who stands behind them?
*NOTE: Holding values above are per anchor with a #8 x 1½" screw. Industry standard safe holding = 1/4 of ultimate load.
Benefits
TOGGLER and typeface, logo symbol, and SnapSkru are worldwide registered trademarks of Mechanical Plastics Corp. SP and SPM are worldwide
trademarks of Mechanical Plastics Corp. U.S. Patents #7,144,212 & 7,320,569 and foreign counterparts. © 2007, 2008 Mechanical Plastics Corp.
TOGGLER Anchor System 800.544.2552 [Toll-Free]
Div. of Mechanical Plastics Corp. 914.347.2727 [Tel]
P.O. Box 554 914.347.3634 [Fax]
444 Saw Mill Road [e-mail]
Elmsford, NY 10523 USA www.toggler.com