allears_User manual Minsu Yoon
allears User manual Product description Connection Basic Specifications Sensor Appearance Specifications Battery INEAR Function Product Basic Information Bluetooth version Bluetooth v5.2 Mobile APP Android Package Components Charging Case, INEAR, Eartips USB Cable, Quick Guide Hall Sensor INEAR Module (W x L x T) 20.84 x 45.58 x 30.81 mm CRADLE Module (W x L x T) 75.98 x 75.97 x 36 mm Using Time 2.
allears User manual Diredctions for use Step One Step Two Open the cover of allears product and take out the in- You can find the application with the name [ allears ] in ear Left & Right module; Android mobile phone; Connect the allears inears module from the mobile When connected, the remaining battery level phone's Bluetooth list. information is displayed.
allears User manual Diredctions for use Step Four Step Three Please wear it both ears as shown in the picture. After wearing, use the app to operation your in-ears device; Use the application as follows.
allears User manual Diredctions for use Step Five When the allears cradle's battery is low and the red LED blinks, use the USB C-type cable to charge; There is a USB port on the back of the product.; Charge it using a 5V power adapter.
FCC Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Thank you Minsu Yoon
