Instructions / Assembly

3
WARNING:
The Caddy should never be placed in a horizontal position with the
pump attached as the pump seals will allow fuel leakage. The Caddy
should always be in a vertical position when the pump is attached.
Todd Gas Caddy Filling Instructions
1. Fill the Gas Caddy in a horizontal position only. Do not fill in or on a motor
vehicle or marine craft.
2. Remove vented fill cap.
3. Check to see that the ball valve is in the closed position.
4. Discharge your static electricity before fueling by physically touching a metal
surface away from the nozzle.
5. Fill tank slowly to decrease chance of static electricity buildup.
Caution: Do not over fill tank.
28 U.S. gallon maximum capacity.
6. Replace fill cap and check that the vent is closed.
IMPORTANT: WHEN FILLING THE GAS CADDY, IT MUST
BE IN A HORIZONTAL POSITION.
If a pump was purchased with this Gas Caddy, please see separate Pump In-
stallation Instructions.