User's Manual

2. Click II--SSeerriieess CCoonnttrrooll CCeenntteerr,, .
In the list to the left, select which hardware configuration you want to change. In the area to the right, the different settings will be
revealed. The changes are instantly executed.
For more information about configuring the I-Series with the I-Series Control Center, see
6 Configuring the I-Series with the
I-Series Control Center, page 33
.
Anywhere you see this icon, , an information box is displayed when you briefly rest the mouse pointer on the icon
or by touching the icon on the screen.
3.5 Accessing the microSD-Card
The microSD-Card (position 28 in Figure 3.2 Bottom, Left and Right Side, page 10 ) is installed in the I-Series device by default.
3.5.1 Removing the microSD-card
To remove the microSD-card:
1. Place the I-Series device face down on a flat surface.
2. Use a Phillips screwdriver to remove the screw that fastens the lid in place.
3. Remove the lid.
4. Press to release the microSD-card.
5. Pull the card out of the socket.
6. Replace the lid.
7. Tighten the screw with a Phillips screwdriver to fasten the lid in place.
12
3 Overview of the Tobii I–12 and I–15
Tobii I-Series User’s manual v.1.0.4 - en-US