User's Manual
53
Tobii C-Series User’s Manual
Scope
2. Select how the interactions setting should be reected:
• Click Default settings of the currently selected user
prole if you want to apply the new settings to the whole
user prole and not only to a particular application.
• Click Application specic settings of the currently
selected user prole if you want to apply the new
settings to a specic application of a user prole. Then select
application in the Application drop down list.
Method
3. Select the activation method from the Activation method drop
down list. There are three methods available, each with different
activation times:
• Dwell. Adjust the dwell time by moving the Dwell time
slider.
• Switch. Adjust the minimum time for a click duration and the
minimum time between clicks by moving the respective slider.
• Blink. Adjust the minimum and maximum duration for a blink
by moving the respective slider.
Visual Feedback
4. Select the symbol for visual feedback from the Dwell feedback
type drop down list.
5. Select the color of the feedback symbol in the Feedback color
drop down list.
6. Specify the dot size and opacity of the feedback symbol by moving
the respective slider.
7. Select the Show visible outline around the activated region
checkbox to see a dashed line around the activated area in all
instances of eye control selection
8. Select Simulate activation if you want to see how the activation
method will appear on the screen. The example is shown above the
Simulate activation button.
Chapter 6 Tobii CEye Module & Eye Control