User's Manual

2. Look at the area where the System Off-Screen menu has been configured for your Tobii Dynavox I-Series+, see Figure

5.13 System Off-Screen Area, page 42

For more information and for how to configure the System Off-Screen menu, see 7.6.1 System Off-Screen Menu, page

71.

3. Selecting, using Gaze Interaction, the

(Pause) icon that pops up.

To Sleep-on-Gaze:

1. Make sure the Sleep-on-Gaze function is activated, see 6.4 Wake-on-Gaze®, page 50

2. Look at the area where the System Off-Screen menu has been configured for your Tobii Dynavox I-Series+, see Figure

5.13 System Off-Screen Area, page 42

For more information and for how to configure the System Off-Screen menu, see 7.6.1 System Off-Screen Menu, page

71.

3. Selecting, using Gaze Interaction, the

(Sleep-on-Gaze) icon that pops up.

4. Select Yes for Sleep or No for Cancel

5.7 Using the Cameras

The two built-in cameras allows you to take snapshots of items in front of the Tobii Dynavox I-Series+ device and also from the

display side.

Use Tobii Dynavox Communicator /Tobii DynaVox Compass or other relevant software to operate the cameras.

5.8 Using the GEWA Programmable IR Remote Control

The Tobii Dynavox I-Series+ device includes a GEWA Programmable IR Remote Control Ͷ Environmental Control Unit (ECU)

with two (2) filter windows:

ͻ 1 Transmitter filter window Ͷ Position 6 in Figure 3.1 Front and Back, page 16

ͻ 1 Transmitter and Receiver filter window Ͷ Position 27 in Figure 3.2 Bottom, Left and Right Side, page 17

Use the Transmitter and Receiver filter window (position 27 in Figure 3.2 Bottom, Left and Right Side, page 17) when

programming the GEWA Programmable IR Remote Control in

Tobii Dynavox Communicator /Tobii DynaVox Compass.

The GEWA Programmable IR Remote Control is a programmable Infrared device that can be used to control equipment with an

IR Remote Control such as TV-sets or DVDs.

For more information about how to use and program the GEWA Programmable IR Remote Control, see the Tobii Dynavox

Communicator 5 Getting Started or the Compass User Guide.

If the device you are trying to control is not responding, try tilting the Tobii Dynavox I-Series+ device up or down

slightly to change the angle at which the IR signal is being sent.

The ECU is not to be relied on as the only method of interaction with IR controlled devices.

5.8.1 Handling I-Series Product Key

To use the GEWA Programmable IR Remote Control, a I-Series Product Key is required. To view or enter a I-Series Product

Key, go to the I-Series Product Key section in the I-Series Control Center. See 6.7 I-Series Product Key, page 54

When the I-Series Product Key is in place, the GEWA IR Programmable Remote Control is ready to use.

Tobii Dynavox I-Series+ Users manual v.1.0 - en-US

5 Using the Tobii Dynavox I-Series+