User's Manual
3.6.1 Mounting the Tobii Dynavox QR Adapter Plate
To mount the Tobii Dynavox QR adapter plate:
1. Place the Tobii Dynavox I-Series+ device face down on a flat surface.
2. Select the required side of the plate, see 1.3.2 Mounted Use, page 10.
3. Place the plate onto the device with the required side facing away from the unit.
4. Tighten the three (3) screws using a Torx T20 screwdriver to that fasten the plate to the unit.
3.6.2 Removing the Tobii Dynavox QR Adapter Plate
To remove the Tobii Dynavox QR adapter plate:
1. Place the Tobii Dynavox I-Series+ device face down on a flat surface.
2. Use a Torx T20 screwdriver to remove the three (3) screws that fasten the plate to the unit.
3. Remove the plate.
Tobii Dynavox I-Series+ Users manual v.1.0 - en-US
3 Overview of the Tobii Dynavox Iʹ12+ and Iʹ15+
21