User's Manual

Table Of Contents
7. Tighten the screw with a Phillips screwdriver to fasten the lid in place.
3.5.2 Inserting the microSD-Card
To install the microSD-card:
1. Place the Tobii Dynavox I-Series+ device face down on a flat surface.
2. Use a Phillips screwdriver to remove the screw that fastens the lid in place.
3. Remove the lid.
4. Carefully push the microSD-card into the socket.
Do not use force when pushing in the microSD-card. If the microSD-card and socket do not join with reason-
able ease, they probably do not line up.
5. Replace the lid.
6. Tighten the screw with a Phillips screwdriver to fasten the lid in place.
3.6 Tobii Dynavox Quick Release Adapter Plate
Tobii Dynavox QR adapter plate has two sides:
Daessy REHAdapt
Make sure the required side of the Tobii Dynavox QR adapter plate is face away from the Tobii Dynavox I-Series+ for the mount-
ing system to use.
20
3 Overview of the Tobii Dynavox I12+ and I15+
Tobii Dynavox I-Series+ Users manual v.1.0 - en-US