User's Manual
Table Of Contents
- 1 Introduction
- 2 Safety
- 3 Overview of the Tobii Dynavox I–12+ and I–15+
- 4 Batteries in the Tobii Dynavox I-Series+
- 5 Using the Tobii Dynavox I-Series+
- 5.1 Starting the Device
- 5.2 Shutting Down the Device
- 5.3 Using Gaze Interaction
- 5.4 Using Windows Control
- 5.5 Wake the Tobii Dynavox I-Series+ from Sleep with Gaze Interaction
- 5.6 Pause/Resume Gaze Interaction and Put the Tobii Dynavox I-Series+ to Sleep with Gaze Interaction
- 5.7 Using the Cameras
- 5.8 Using the GEWA Programmable IR Remote Control
- 5.9 Adjusting the Volume
- 5.10 Adjusting the Sound
- 5.11 Performing a Factory Recovery
- 5.12 Calibrating the Touch Screen
- 6 Configuring the Tobii Dynavox I-Series+ with the I-Series Control Center
- 7 Gaze Interaction Settings
- 8 Gaze Selection Settings
- 9 Product Care
- Appendix A Support, Warranty, Training Resources
- Appendix B Compliance Information
- Appendix C Computer Device States of Operation
- Appendix D Maximum Allowed Temperature
- Appendix E Technical Specifications
- Appendix F Approved Accessories
• Through the communication software installed on the device.
In the list to the left, select which hardware configuration you want to change. In the area to the right, the different settings will
be revealed. The changes are instantly executed.
For more information about configuring the Tobii Dynavox I-Series+ with the I-Series Control Center, see 6 Configuring the
Tobii Dynavox I-Series+ with the I-Series Control Center , page 46.
Anywhere you see this icon, , an information box is displayed when you briefly rest the mouse pointer on the
icon or by touching the icon on the screen.
3.5 Accessing the microSD-Card
The microSD-Card (position 28 in Figure 3.2 Bottom, Left and Right Side, page 17) is installed in the Tobii Dynavox I-Series+
device by default.
3.5.1 Removing the microSD-card
To remove the microSD-card:
1. Place the Tobii Dynavox I-Series+ device face down on a flat surface.
2. Use a Phillips screwdriver to remove the screw that fastens the lid in place.
3. Remove the lid.
4. Press to release the microSD-card.
5. Pull the card out of the socket.
6. Replace the lid.
Tobii Dynavox I-Series+ User’s manual v.1.0 - en-US
3 Overview of the Tobii Dynavox I–12+ and I–15+
19