User's Manual
Table Of Contents
- 1 Introduction
- 2 Safety
- 3 Overview of the Tobii Dynavox I–12+ and I–15+
- 4 Batteries in the Tobii Dynavox I-Series+
- 5 Using the Tobii Dynavox I-Series+
- 5.1 Starting the Device
- 5.2 Shutting Down the Device
- 5.3 Using Gaze Interaction
- 5.4 Using Windows Control
- 5.5 Wake the Tobii Dynavox I-Series+ from Sleep with Gaze Interaction
- 5.6 Pause/Resume Gaze Interaction and Put the Tobii Dynavox I-Series+ to Sleep with Gaze Interaction
- 5.7 Using the Cameras
- 5.8 Using the GEWA Programmable IR Remote Control
- 5.9 Adjusting the Volume
- 5.10 Adjusting the Sound
- 5.11 Performing a Factory Recovery
- 5.12 Calibrating the Touch Screen
- 6 Configuring the Tobii Dynavox I-Series+ with the I-Series Control Center
- 7 Gaze Interaction Settings
- 8 Gaze Selection Settings
- 9 Product Care
- Appendix A Support, Warranty, Training Resources
- Appendix B Compliance Information
- Appendix C Computer Device States of Operation
- Appendix D Maximum Allowed Temperature
- Appendix E Technical Specifications
- Appendix F Approved Accessories
3.2.2 Ports, Sensors and Device Buttons
Figure 3.1 Front and Back
Position Description Position Description
1
Webcam 2 MP Fixed Focus (FF)
6
GEWA Programmable IR Re-
mote Control (Transmitter)
This port is just for Transmitting
IR Signals. To program the de-
vice, use port in Position 27 in
Figure 3.2 Bottom, Left and
Right Side, page 17
2
Light sensor
7
Camera 5 MP Auto Focus (AF)
3
Microphone
8
Mounting
4
Eye Tracker
9
Speakers
5
Carrying grip
30
Label
16
3 Overview of the Tobii Dynavox I–12+ and I–15+
Tobii Dynavox I-Series+ User’s manual v.1.0 - en-US