User's Manual
Table Of Contents
- 1 Safety and Compliance
- 1.1 Safety and Usage
- 1.1.1 Usage Warning
- 1.1.2 Emergency Warning
- 1.1.3 Child Safety
- 1.1.4 Infrared Warning
- 1.1.5 Epilepsy Warning
- 1.1.6 Mechanical Shock Warning
- 1.1.7 Bending Warning
- 1.1.8 Do not open the devices
- 1.1.9 Connectors
- 1.1.10 HDMI Cable Warning
- 1.1.11 Environment
- 1.1.12 Battery Warning
- 1.1.13 Wireless Warning
- 1.1.14 Transportation
- 1.1.15 Accessories
- 1.1.16 Cleaning
- 1.1.17 Disposal
- 1.2 Compliance Information
- 1.3 Other limitations and considerations
- 1.3.1 Intended use
- 1.3.2 SD memory cards
- 1.3.3 Multiple connections between Glasses Controller Software and Recording Unit
- 1.3.4 Eye movement classification
- 1.3.5 Light conditions
- 1.3.6 Eyelashes
- 1.3.7 Droopy eyelids
- 1.3.8 Eye glasses and contact lenses
- 1.3.9 WLAN connectivity
- 1.3.10 Power
- 1.3.11 Keeping Tobii Glasses Controller Software and the Recording Unit firmware up to date
- 1.1 Safety and Usage
- 2 Introduction
- 3 Installing and Updating Tobii Glasses Controller Software
- 4 Updating the Tobii Glasses Recording Unit firmware
- 5 Getting to know Tobii Glasses 2
- 6 Workflow Quick Guide
- 7 Basic Operations with Tobii Glasses 2
- 7.1 Setting up Tobii Glasses 2 hardware
- 7.1.1 Charging Recording Unit batteries
- 7.1.2 Inserting/removing the battery – Glasses Recording Unit
- 7.1.3 Inserting/removing an SD memory card in the Recording Unit
- 7.1.4 Connecting the HDMI cable
- 7.1.5 Changing nose pads (remove and mount new):
- 7.1.6 Changing the lenses on the Head Unit
- 7.1.7 Turning Tobii Glasses 2 on and off
- 7.2 Managing study data in Tobii Glasses Controller Software
- 7.3 Connecting the Tablet running Tobii Glasses Controller Software to a Recording Unit
- 7.4 Fitting the Tobii Glasses 2 Eye Tracker onto a participant for recording
- 7.5 Recording with Tobii Glasses 2
- 7.6 Watching a recording live with the Live Viewer
- 7.7 Locating recordings
- 7.8 Replaying a recording
- 7.9 Exporting a gaze replay video
- 7.10 Deleting a recording
- 7.11 Backing up recorded data
- 7.12 Other operations and information
- 7.13 Tobii Glasses Controller Software considerations and limitations
- 7.1 Setting up Tobii Glasses 2 hardware
- 8 Advanced Usage with Multiple Units
- 9 Accessories
- Appendix A Technical Specifications
- Appendix B Calibration target
Appendix B
Calibration target
Below are two scale illustrations of the Tobii Glasses 2 Calibration Target; one with accurate dimensions illustrated (below left)
and one without (below right). The right target can be printed, cut out and used for calibration with Tobii Glasses 2. Please
verify that the dimensions of the printout are accurate, as stated in the below left illustration.
If you wish to use a printed Calibration target, you must print and cut out the right hand Calibration target. Using the
above left target with dimensions in any way may impact calibration.
40
Appendix B Calibration target
Tobii Glasses 2 Eye Tracker User’s manual v.1.0.2 - en-US