User Guide

Portable Durable Case Setup
Disconnect the TDPilot charging cable from the
device.
Power off the TDPilot.
Use the screwdriver that came in the box with your
device to remove the eight screws on the back of the
device.
Remove the two screws from the bottom of the device.
Lift the front of the protective case off of the TDPilot.
Disconnect the USB-C to USB-C cable from the
TDPilot base and the iPad.
Remove the iPad from the TDPilot base.
1
2
3
Note: Keep all of the screws together in
a bag or other container (not included).
4
5
6
7
Portable Durable Case or Mounted?
TDPilot can be used in a portable durable case or attached to a mounting system.
Evaluate the options below to determine the best choice for you at this time.
Portable Durable Case
■ You can hold and carry an iPad.
■ You primarily move from place to place
by walking.
If this option suits you, proceed to
Portable Durable Case Setup.
Mounted
■ You have difficulty holding or carrying an
iPad.
■ You primarily move from place to place
using a wheelchair.
■ Hand and arm mobility or fatigue affect
your ability to use the portable durable
case.
If this option suits you, skip Portable
Durable Case Setup and proceed to
Mounted Setup.
10
x
Note: As conditions change, you may need to re-evaluate which solution
works best for you.
4