Instructions / Assembly

2
3
4
5
1
Attach the Rear Wheels │ 6
Rear Bottom View
2WD
Remove all the parts from the rear axle.
1. Slide the rear gear box onto the rear axle. “R” labeled gear box should be fit
to the “R” side of vehicle body; “L” labeled gear box should be fit to “L” side of
vehicle body. Keep the motor and the connector on the gear box pass through
the larger hole on the rear of the vehicle and out where the battery sits.
2. Slide the rear wheel onto the rear axle. And keep the driving wheel match up
with the gear box.
3. Slide the Ø12 washer onto the rear axle.
4. Tighten a lock nut to the end of the rear axle with a spanner.
5. Fit the hubcaps to the wheels.
Repeat the above procedure to assemble the other rear wheel.