Daim Ntawv Qhia Tus Neeg Siv

Step 1: Assembly

Separate the Speech Case Mini front plate and body by

pulling the two pieces apart.

Press the iPad into the front plate, aligning the iPad

camera with the cutout in the plate.

Press the iPad/plate assembly into the Speech Case

Mini body.

Squeeze around the edges to click it together.

Flip the whole assembly over.

Tighten the top two screws.

Lift up the foldable leg and tighten the two screws at

the bottom.

Do not over-tighten

the screws

Step 2: Bluetooth Pairing

Connect the power cable to the Speech Case Mini and then plug into a socket.

Switch the Speech Case Mini power toggle to the ON position.

On the iPad, go to Settings > Bluetooth.

Make sure that Bluetooth is turned ON.

Select SCmini.

If using multiple Speech Cases in one room, you can identify each Speech

Case by the last ﬁve digits of the Bluetooth ID. It will match the unique ﬁve-

digit serial number located under the foldable leg on the Speech Case.