Installation & Assembly

2" x 4"
JUNCTION BOX
1
Installation Instructions for
Secure the mounting plate to the junction box.
Connect the fixture ground wire to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
Mount the fixture onto the mounting plate and secure it in place with the fixture screws.
Screw the lamp of choice into the socket. Refer to the label on the socket for Max Wattage Information.
1
2
3
4
5
1.0
T 1042W
T 1042W
6
GP I :ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing compliant junctionNEC
boxes. Must use a 2" X 4" Junction Box.
This product is safety listed for damp locations.
Incandescent lamps may be dimmed with a standard incandescent dimmer.
LED LEDlamps may be dimmed with a dimmer. Consult lamp manufacturer for
additional information.
1A
Beckham Double Wall
Wall
CAUTION RISK OF FIRE-
This product must be installed in accordance with the
applicable installation code by a person familiar with the
construction and operation of the product and the hazards
involved.
Use minimum 90°c supply conductors.
MOUNTING
PLATE
3
4
5
FIXTURE
SCREW
LAMP
6
SOCKET
SOCKET
6
LAMP
FIXTURE