Manualshelf

Installation & Assembly

ManualsBrandsTOB by Thomas O'Brien by Generation Lighting ManualsLightingBeckham 1 - Light Dimmable Wallchiere
12
1
Installation Instructions for
Temporarily install the mounting plate to the junction box.
Mark the anchor hole locations through the mounting plate, then remove the mounting plate.
Drill appropriate sized holes and install the anchors.
Secure the mounting plate to the junction box.
Screw the anchor screws into the anchors.
Connect the fixture ground wire to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
Mount the fixture onto the mounting plate and secure it in place with the fixture screws.
Install the candle tube by placing it over the socket.
Install the shade by placing it over the socket then use the shade ring tool to tighten the shade ring onto the socket.
Screw the lamp into the socket. Refer to the label on the socket for Max Wattage Information.
1
2
3
4
5
1.0
T 1001V
T 1001V
6
7
8
GP I :ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing compliant junctionNEC
boxes.
This product is safety listed for damp locations.
Incandescent lamps may be dimmed with a standard incandescent dimmer.
LED LEDlamps may be dimmed with a dimmer. Consult lamp manufacturer for
additional information.
1A
JUNCTION BOX
9
10
11
Beckham 1 Light Vanity
Vanity
CAUTION RISK OF FIRE-
This product must be installed in accordance with the
applicable installation code by a person familiar with the
construction and operation of the product and the hazards
involved.
Use minimum 90°c supply conductors.
MOUNTING
PLATE
7
8
9
ANCHOR
FIXTURE
SCREW
ANCHOR
SCREW
LAMP
3
10
5
12
11
12
SHADE RING
SHADE
SHADE RING
TOOL
CANDLE TUBE
SOCKET
FIXTURE

Summary of content (2 pages)