TMR_TMBL2_IB_3-7-06 7/3/06 4:14 PM Page 1 OWNER’S MANUAL Model No.
TMR_TMBL2_IB_3-7-06 7/3/06 4:14 PM Page 2 IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed including the following: 1. Read all instructions. 2. To protect against risk of electrical shock do not put cord, plugs, or appliance in water or other liquid. 3. Close supervision is necessary when any appliance is used by or near children. 4. Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning. 5.
TMR_TMBL2_IB_3-7-06 7/3/06 4:14 PM Page 3 ADDITIONAL IMPORTANT SAFEGUARDS 1. All users of this appliance must read and understand this Owner’s Manual before operating or cleaning this appliance. 2. The cord to this appliance should be plugged into a 120V AC electrical outlet only. 3. Do not leave this appliance unattended during use. 4. If this appliance begins to malfunction during use, immediately turn the Control Switch to the (O) OFF position and unplug the cord.
TMR_TMBL2_IB_3-7-06 7/3/06 4:14 PM Page 4 GETTING TO KNOW YOUR TOASTMASTER® PERSONAL BLENDER PRODUCT MAY VARY SLIGHTLY FROM ILLUSTRATIONS 1. 1. 2. 3. 4. Cap (P/N 71252) Blending Jar Lid (P/N 71253) Blending Jar (P/N 71254) Rubber Seal Ring (P/N 71255) 5. Blade Assembly (P/N 71256) 6. Motor Housing 7. Control Button 8. Cord Storage 9. Non-Slip Rubber feet 10. Power Cord with Polarized Plug 2. 3. MAX 500ml 400ml 300ml 200ml 4. 5. 6. 7. 10. 8. 9.
TMR_TMBL2_IB_3-7-06 7/3/06 4:14 PM Page 5 BLENDER ASSEMBLY INSTRUCTIONS NOTE: Before assembling, make sure the cord is unplugged. CAUTION: Use extreme care when handling the Blade Assembly. Do not touch Blades with your fingers. The Blades are very sharp and can cause injury if touched. 1. Carefully place the Rubber Seal Ring over the Blade Assembly. 2.
TMR_TMBL2_IB_3-7-06 7/3/06 4:14 PM Page 6 OPERATING INSTRUCTIONS (CONTINUED) NOTE: Do not fill the Blending Jar more than the MAX fill line (500ml). Never operate when the Blending Jar is empty. CAUTION: Never place the Blade Assembly on the Motor Housing without the Blending Jar being completely assembled and securely tightened. 4. Place Blending Jar Lid with Cap on Blending Jar. Remember: Always hold Lid in place during processing. 5. Plug the power cord into a 120V AC electrical outlet.
TMR_TMBL2_IB_3-7-06 7/3/06 4:14 PM Page 7 USER MAINTENANCE INSTRUCTIONS This appliance requires little maintenance. It contains no user serviceable parts. Do not try to repair it yourself. Any servicing that requires disassembly must be performed by a qualified appliance repair technician. CAUTION: Never immerse the Motor Housing, plug or cord in water or any other liquid. 1. Always unplug the unit before cleaning. 2. Whenever possible, rinse parts immediately after processing to make cleanup easier.
TMR_TMBL2_IB_3-7-06 7/3/06 4:14 PM Page 8 Figure 3 STORAGE CAUTION: Always assemble clean and dry Blender parts correctly before storing on the Motor Housing. Severe injury can result if Blender is accidentally turned ON when not properly assembled. Unplug and clean unit. Store in original box or in a clean, dry place. Never store Blender while it is hot or plugged in. Never wrap cord tightly around the appliance.
TMR_TMBL2_IB_3-7-06 7/3/06 4:14 PM Page 9 LIMITED ONE-YEAR WARRANTY Warranty Coverage: This product is warranted to be free from defects in materials or workmanship for a period of one (1) year from the original purchase date. This product warranty is extended only to the original consumer purchaser of the product and is not transferable.
