User's Manual

Table Of Contents

7. OPERATION

Step 1. Conrmthatthewirelessmicrophoneandthewirelessreceiverareidenticalinthebank

and channel numbers

If not identical, turn the power switch to the OFF position, then set the bank and channel

numbers to the same ones as the receiver.

Step 2. TurnthePowerswitchtotheONposition.Then,conrmthebatterycheckerwilllightgreen

or orange.

Step 3. Turn the Power switch to the OFF position after use.

8. FUNCTION SETTINGS

8.1. Setting the Bank and Channel Numbers

Step 1. Switch off the power.

Step 2. Rotate the battery compartment cover

counterclockwise to detach it.

Step 3. Using the supplied screwdriver, set the

bank selector switch’s pointer to the desired

number, and set the channel selector switch’s

pointer likewise.

Step 4. Replace the battery compartment cover.

Screwdriver

(accessory)