Datasheet

F-1000 SERIES
F-1000B/W/BT/WT/BTWP/WTWP
SPECIFICATIONS
Model No. F-1000B F-1000W F-1000BT F-1000WT F-1000BTWP* F-1000WTWP*
E nclosure Type Bass-reflex type
Power Handling Capacity 30 W (continuous pink noise)
—
90 W (continuous program)
Rated Input — 15 W
Rated Impedance 8 Ω 100V line: 670Ω (15W), 2 kΩ (5W), 3.3 kΩ (3W), 10 kΩ (1W)
70V line: 330Ω (15W), 670Ω (7.5W), 2 kΩ (2.5W), 3.3 kΩ (1.5W), 10 kΩ (0.5W)
Sensitivity 87 dB (1W, 1m) at installation in 1/2 free sound field
Frequency Response 85 – 20,000 Hz, -10 dB at installation in 1/2 free sound field
Crossover Frequency 5 kHz
Directivity Angle Horizontal: 90º, Vertical: 90º
Speaker Component Low frequency: 10 cm (4") cone-type
High frequency: Balanced dome tweeter
Input Terminal Push-in terminal
Water Protection — IPX4
Operating Temperature — –10°C to +50°C (14°F to 122°F)
Finish Enclosure: HIPS resin, black Enclosure: HIPS resin, white Enclosure: HIPS resin, black Enclosure: HIPS resin, white Enclosure: HIPS resin, black Enclosure: HIPS resin, white
Punched net: Surface-treated Punched net: Surface-treated Punched net: Surface-treated Punched net: Surface-treated Punched net: Surface-treated Punched net: Surface-treated
steel plate, black, paint steel plate, white, paint steel plate, black, paint steel plate, white, paint steel plate, black, paint steel plate, white, paint
Joint bracket, wall bracket: Joint bracket, wall bracket: Joint bracket, wall bracket: Joint bracket, wall bracket: Joint bracket, wall bracket: Joint bracket, wall bracket:
Steel plate, t1.6, black, paint Steel plate, t1.6, white paint Steel plate, t1.6, black, paint Steel plate, t1.6, white, paint Steel plate, t1.6, black, paint Steel plate, t1.6, white, paint
Speaker bracket: Die-cast Speaker bracket: Die-cast Speaker bracket: Die-cast Speaker bracket: Die-cast Speaker bracket: Die-cast Speaker bracket: Die-cast
aluminum, black, paint aluminum, white, paint aluminum, black, paint aluminum, white, paint aluminum, black, paint aluminum, white, paint
Dimensions 130 (W) × 202 (H) × 131 (D) mm (5.12" × 7.95" × 5.16")
Weight 1.8 kg (3.97 lb) (including the supplied brackets) 2 kg (4.41lb) (including the supplied brackets)
Accessories Speaker bracket × 1, Joint bracket × 1, Wall bracket × 1, Bracket fixing screw × 1 set Speaker bracket × 1, Joint bracket × 1, Wall bracket × 1,
Bracket fixing screw × 1 set, Terminal cover × 1,
Terminal cover mounting screw × 4
Option Board hanger bracket: HY-BH10B Board hanger bracket: HY-BH10B Board hanger bracket: HY-BH10B Board hanger bracket: HY-BH10B Speaker mount bracket: YS-60B
Ceiling mount bracket: HY-CM10B Ceiling mount bracket: HY-CM10W Ceiling mount bracket: HY-CM10B Ceiling mount bracket: HY-CM10W
Cluster bracket: HY-CL10B Cluster bracket: HY-CL10B Cluster bracket: HY-CL10B Cluster bracket: HY-CL10B
Recommended Subwoofer HB-1, FB-10, FB-100
* Note: Avoid installing the speaker in locations close to the seashore or in indoor swimming facilities.
APPEARANCE AND DIMENSIONAL DIAGRAM TERMINAL COVER USE (F-1000BTWP/WTWP only)
Notes
• For the speaker cable, use a cable with a diameter of 6 – 10 mm, which will fit the cable
bushing.
• To ensure waterproof capabilities, firmly mount the terminal cover to the speaker and
tighten the bushing on the cover.
Terminal cover (accessory)
Bushing*
Speaker cable
Input terminal
Tapping screw 4 x 12 (accessory)
* Screwed onto the Terminal cover at the factory
.
30mm
10mm
[Stripped conductor]
130 (5.12")
131 (5.16")
202 (7.95")
30 (1.18")
2–M5 (depth 14 (0.55"))
(for bracket mounting)
30 (1.18")
30 (1.18")
28 (1.1")
2–M5 (depth 14 (0.55"))*
(for bracket mounting)
Rotally switch
(F-1000BT/WT/
BTWP/WTWP only)
*Hole plugs are pre-fitted into
the holes at the factory.
Before attaching the speaker
mounting bracket to this side,
remove them using a pointed
tool.
Side View Rear ViewFront View
Bottom View
WALL BRACKET AND JOINT BRACKET MOUNTING
30mm
30mm
4-ø6m
Joint bracket
Fixing bolt M5 x 60
Wall bracket
Hexagon bolt M6 x 12
(with plain washer
and spring washer)
Joint bracket
Fixing bolt
M5 x 60
Speaker bracket
4-ø6mm
25mm
30mm
Wall bracket mounting
Joint bracket mounting
Vertical installation
Horizontal: Max. 82°,
Vertical: Max. 45° downward
Horizontal installation
Horizontal: Max. 60°,
Vertical: Max. 45° downward
Vertical speaker
mounting
Ceiling
mounting