Manual

11
DT-930
Note
The rack mounting screws (5 x 12) are dedicated for the TOA equipment racks.
Do not use them for other racks.
Rack mounting screw 5 x 12
(supplied with the MB-15B)
Fiber washer for M5
(supplied with the MB-15B)
Tapping screw 3 x 14
(supplied with the MB-15B)
MB-15B (optional)
10. RACK MOUNTING
When mounting the unit on an equipment rack, use the optional Rack Mounting Bracket MB-15B.
Before mounting, remove 4 plastic feet on the unit bottom.
Note
Be sure to place the unit below heat generating equipment such as power supply units or amplifiers. Put a
perforated panel between the unit and the heat generating equipment as required.