Instruction Manual
62
The Remove Parameter screen is displayed.
Step 3. Click the [Apply] button.
The Remove Parameter completed screen is displayed.
Step 4. Check that the Parameter has been deleted.
You can conrm that the designated Parameter has been
deleted on the Custom Parameter Setting screen that
appears by clicking on the “Custom Parameter Setting”
text.
The added custom parameters are displayed in
the selection list as speaker preset data on the
Xover Combination Setting screen (See p. 57).
The title name of the Crossover template le
becomes the speaker preset data name.
The name is prexed and postxed with an
asterisk (*) to indicate that the set parameter is a
custom one.
[Using the Custom template data]