Instruction Manual

60
11.1.6. Creating the Speaker preset data by yourself
It is possible to save the Crossover template le (See p. 15) created using the PC Software into the unit as
the custom template data.
Note
When saving the Crossover template le, be sure to name
the title in addition to the le name. The title name of the
Crossover template le becomes the speaker preset data
name. There is no limit to the type of input characters of the
title name.
Step 1. Click on the “Custom Parameter Setting”
text on the Web browser’s top page.
The Custom Parameter Setting screen is displayed.
Step 2. Click the [Add] button.
The Add Parameter screen is displayed.
Step 3. Select the preset Crossover template le, then click the
[Apply] button.
[Adding the custom template]