Instruction Manual
4
1. GENERAL DESCRIPTION OF THE DP-SP3 PC SOFTWARE
This Software is designed to be used exclusively for setting parameters of acoustic signal processing functions
such as the compressor and lter functions for the DP-SP3 Digital Speaker Processor. Install the Software
program on a PC meeting the requirements below.
2. FEATURES
• Up to four DP-SP3 units can be controlled from a single PC with this Software installed.
• The DP-SP3 performs only its state indications, power ON/OFF operation, and muting operation, while this
Software performs other operations, settings, and state displays of the DP-SP3.
3. RECOMMENDED PC REQUIREMENTS
Install this Software on a PC meeting the requirements below.
Hardware Requirements
CPU 1.0 GHz, Intel Pentium 4 or higher
Memory Over 512 MB for Windows XP, over 1.0 GB for others
Display 1024 x 768 resolution or higher
Free Hard Disk Space Over 16 MB
however, over 600 MB is required for the 32 bit version or over 1.5 GB for the 64
bit version when “.NET Framework” is not yet installed
Optical Drive CD-ROM drive or CD/DVD Multi-drive
LAN Compatible to 10BASE-T or faster connection
Software Requirements
OS Windows XP Service Pack 3 or later, 32/64-bit Windows Vista SP1 or later, 32/64-
bit Windows 7
Following are the veried operating systems
Windows XP Service Pack 3 (Home Edition, Professional)
32-bit Windows Vista Service Pack 2 (Business)
64-bit Windows Vista Service Pack 2 (Business)
32-bit Windows 7 (Professional)
64-bit Windows 7 (Professional)
Required Component .NET Framework 4 Client Prole (Internet access is required when “.NET
Framework” needs to be installed)
• Pentium is the trademark of Intel Corporation in the United States and other countries.
• Windows and Windows Vista are the registered trademarks of Microsoft Corporation in the United States and
other countries.
• Regarding other company names and products, they are also trademarks of individual companies.