Instruction Manual

18 19
*
2
The display of the signal indicator changes depending on the signal levels at the input and output while the
PC is in communication with the DP-SP3.
• The indicator LEVEL A indicates the signal level immediately after analog-to-digital conversion obtained from
the unit.
• The indicator LEVEL B indicates the signal level obtained by adding the input gain value to the LEVEL A signal
level.
• The indicator LEVEL C indicates the signal level immediately before digital-to-analog conversion obtained
from the unit.
• The indicator LEVEL D indicates the signal level obtained by adding the output attenuator value to the LEVEL
C signal level.
Red: Signal level is 18 dB or more.
Yellow: Signal level is 12 dB or more and less than 18 dB.
Green: Signal level is –40 dB or more and less than 12 dB.
8.4. Contents View
Clicking each box in the ow view causes each corresponding view to be displayed at the lower area of the ow
view.
LEVEL C
LEVEL D
LEVEL B
LEVEL A
Contents view area
Flow view