Instruction Manual

14 15
7.2. Deleting the Unit
The unit conguration already created can be deleted only when the PC is not in communication with the DP-
SP3.
Select the unit to be deleted in the unit view or ow view.
Select [Unit Delete Unit] from the menu to display a dialog for conrmation.
Clicking the OK button deletes the unit.
7.3. Changing the Crossover Combinations
The conguration crossover combination already created can be changed only when the PC is not in
communication with the DP-SP3.
Select the unit for which you want to change the crossover combination in the unit view or ow view.
Select [Unit Change X-over Combination] from the menu to display the Crossover Combination screen.
Crossover combination settings can be changed in the same procedures as for creating a new unit conguration.
7.4. Changing the Crossover Slopes
Select the unit for which you want to change the crossover slopes in the unit view or ow view.
Select [Unit Change X-over Slope] from the menu to display the Crossover Slope screen.
Crossover slope settings can be changed in the same procedures as for creating a new unit conguration.
7.5. Name Setting
Select [Unit Names] from the menu to display the Name setting screen.
Enter a name in the “Unit name” eld on the Name setting screen, click the [OK] button to display the name in
the unit eld.
7.6. Storing the Unit Configuration as a Template
The set equipment conguration can be saved as a template in the unit view or ow view.
Select [Unit Save as a Template Unit Template] from the menu to display the le storing screen.
Enter a le name in the le name eld, then click [Store].
7.7. Storing the Crossover Settings as a Template
The set crossover box (example: ) can be saved as a template in the unit view or ow view.
Select [Unit Save as a Template X-over Template] from the menu, and the le saving screen is displayed.
Enter a le name in the le name eld, then click [Store].