Instruction Manual

Step 7. Set the Input PAD.

7-1. Select “Unit Input Pad Settings” from the menu when the communication

with the DP-SP3 unit is disconnected.

The Input PAD Setting screen is displayed.

7-2. Set each input sensitivity of Inputs 1 and 2, then click the [OK] button.

PAD ON: +4 dB*

PAD OFF: –10 dB*

* 0 dB = 0.775 V

Note

Input PAD setting can be operated only when connection to the DP-SP3 unit is not established.

To reect the settings to the DP-SP3 unit after setting completion, establish the connection to the DP-

SP3 unit, then send the set data. (See p. 53.)