Instruction Manual

10
6.2.6. Remote
Connect... : Connect the DP-SP3 to a PC for online processing.
Disconnect : Disconnects the DP-SP3 from a PC for ofine processing.
Note
While in ofine state, the contents changed by a PC are not reected on the
settings of the DP-SP3.
Bulk Transmission : Transmits data of the currently opened le to the unit.
Bulk Receiving : Receives the DP-SP3’s internal date.
Automatic Connection : Makes an automatic connection when the le is opened next time.
Firmware : Displays the DP-SP3’s rmware version number. (Valid only when online)
Connection Settings : Allows you to perform network settings and to designate the unit’s IP address
to which this DP-SP3 PC Software can access.
6.2.7. Option
Security settings : Sets the user level and the restriction of operations.
Preset G active settings : Performs area settings (Preset G) that can be commonly used for preset
memories 1 − 16.
Contact input settings : Performs function settings regarding contact inputs.
Front Lock On/Off
Off: Enables the DP-SP3 unit’s mute switch operation.
On: Disables the DP-SP3 unit’s mute switch operation.
6.2.8. Help
Version Information : Displays the DP-SP3 PC Software version number.