Owner's manual

11
4.1. Menu Term Description
4.1.1. File
New: Creates (sets) a new data file.
Open... : Calls up the existing data file.
Save: Overwrites the file being edited.
Save As... : Saves the file being edited to the disk under a different name.
Print Settings... : Changes the page margin.
Print... : Prints the document onscreen.
Print Preview... : Displays a preview of the document onscreen.
Exit: Exits the DP-K1 Setting Software.
4.1.2. Edit
Cut: Initializes the setting value after copying the setting value of the designated box
to the clipboard.
Copy: Copies the setting value of the designated box to the clipboard.
Paste: Pastes the clipboard data to the designated box.
Clear: Initializes the setting value of the box.
Set Grouping: Performs the group setting of the box.
Release Grouping: Cancels the group setting of the box.
4.1.3. View
Toolbar: Shows or hides the toolbar.
Status Bar: Shows or hides the status bar.
Unit View: Shows or hides the unit view.
Contents View: Shows or hides the contents view.
Response View: Shows or hides the response view. (See p. 46.)
ARC Measurement View: Shows or hides the ARC measurement view. (See p. 49.)
Memory View
Show/hide: Shows or hides the memory view.
Floating: Floats the memory view window.
Docking: Docks the memory view window.
Mute All
Show/hide: Shows or hides the mute all window. (See p. 60.)
Floating: Floats the mute all window.
Docking: Docks the mute all window.
Level Monitor View: Shows or hides the level monitor view. (See p. 59.)
4.1.4. Unit
Create New Unit... : Creates a new unit.
Delete Unit: Deletes the unit from the setting data.
Change Unit Configuration... : Changes the unit's input/output configuration.
Change Zone Setting: Changes zone settings.
Change X-over
Combination... : Changes crossover combinations.
Slope... : Changes crossover slopes.
Slot Information... Lists the module configuration stored in memory and the slot-mounted module
configuration on the unit's rear.
Names... : Changes the names of the unit and its inputs and outputs.
Save as a Unit Template...
Unit Template... : Stores equipment configuration settings as a template.
X-over Template: Stores crossover settings as a template.