Manual

Step 1. Attach the duct mounting bracket to the appropriate position on the rear frame.

Step 2. Attach the cable duct to the duct mounting bracket.

Screws used

4 x 10 tapping screw ..... 3 (per duct mounting bracket)

Plain washer ................. 1 (per duct mounting bracket)

Notes

• The duct mounting bracket cannot be mounted at the place of the supporting runner. To mount, keep the

duct mounting bracket a bit apart from the runner, and attach it to the frame.

• Installing the cable duct reduces the mountable depth of the component to be installed in a rack to 360 mm

(1.18 ft) from the panel mounting surface.

Rear frame

Rear

Duct mounting bracket *

4 x 10 tapping screw *

Cable duct *

Plain washer for M4 *

* Commercial items

Rear frame

Rear

Cables

Cable tie (accessory)

4.7. Cable Binding

Bundle the cables of each component together using the supplied cable ties as shown below.