Manual

Step 1. Attach the duct mounting plates to the appropriate position on the rear frames.

Step 2. Install the cable ducts to the duct mounting plates.

Screws used

4 x 10 tapping screw ..... 3 (per duct mounting plate)

Plain washer ................. 1 (per duct mounting plate)

Notes

• The duct mounting plate cannot be mounted at the place of the supporting runner. To mount, keep the duct

mounting plate a bit apart from the runner, and attach it to the rear frame.

• Installing the cable duct reduces the mountable depth of the component to be installed in a rack to 540 mm

(1.77 ft) from the panel mounting surface.

Rear frame

Rear

Duct mounting plate *

4 x 10 tapping screw *

Cable duct *

Plain washer for M4 *

* Prepare separately.

Rear frame

Rear

Cables

Cable tie (accessory)

4.7. Cable Binding

Bundle the cables of each component together using the supplied cable ties as shown below.