Owner manual

7
W
al
l surface
W
all surface
Nut
Spring washer
Plain washer
Anchor bolt
(
M8, M10, or W3/8
)
Cable entry hole
Waterproofing area
Rubber gasket
Wall surface
6. Pull out the cable from the wall outlet, then connect it to the composite cable routed to the Wall Mounting
Bracket.
Note: Be sure to seal and insulate each connection of the cable with waterproof tape.
7. Secure the Wall Mounting Bracket to the wall surface, then waterproof the Wall Bracket's base portion
which contacts the wall surface with silicone sealant material.