User guide

ManualsBrandsToa ManualsSafetyC-BC704PB

PENDANT ADAPTER C-BC704PB

INSTRUCTION MANUAL

Thank you for purchasing TOA’s Pendant Adapter. Please carefully follow the instructions in this manual

to ensure long, trouble-free use of your equipment.

1. SAFETY PRECAUTIONS .......................... 2

2. GENERAL DESCRIPTION ........................ 4

3. HANDLING PRECAUTIONS ..................... 4

4. INSTALLATION ......................................... 5

5. SPECIFICATIONS ..................................... 8

Accessories ................................................ 8

TABLE OF CONTENTS

Summary of content (8 pages)

PAGE 1
INSTRUCTION MANUAL PENDANT ADAPTER C-BC704PB TABLE OF CONTENTS 1. SAFETY PRECAUTIONS .......................... 2 4. INSTALLATION ......................................... 5 2. GENERAL DESCRIPTION ........................ 4 5. SPECIFICATIONS ..................................... 8 Accessories ................................................ 8 3. HANDLING PRECAUTIONS ..................... 4 Thank you for purchasing TOA’s Pendant Adapter.
PAGE 2
1. SAFETY PRECAUTIONS • Before installation or use, be sure to carefully read all the instructions in this section for correct and safe operation. • Make sure to observe the instructions in this manual as the conventions of safety symbols and messages regarded as very important precautions are included. • We also recommend you keep this instruction manual handy for future reference.
PAGE 3
WARNING Indicates a potentially hazardous situation which, if mishandled, could result in death or serious personal injury. When Installing the Unit • Avoid installing the unit at heights exceeding 16 meters above the ground since the unit could be exposed to unexpected strong winds that might cause it to fall or result in other accidents. When the Unit is in Use • Do not touch the unit during thunder and lightning, as this may result in electric shock.
PAGE 4
2. GENERAL DESCRIPTION The C-BC704PB is designed to suspend the C-CC704 Combination Camera from the ceiling in combination with the suspension pipe (required separately). 3. HANDLING PRECAUTIONS • Mount the unit to a robustly constructed concrete ceiling surface. Avoid mounting the unit to a pole on which other objects susceptible to wind are also mounted. • Bolts and nuts used to fix the unit to a ceiling are not included.
PAGE 5
4. INSTALLATION 1. Run the composite cable supplied with the C-CC704 through the cable bushing supplied with the unit. Remove the connectors on the end of the composite cable before running the cable through the cable bushing. Insert Remove 2. Secure the Pendant adapter to the C-CC704's case. Camera mounting screw (accessory) (Quantity: 4) Waterproof washer (accessory) (Quantity: 4) C-CC704's case 3.
PAGE 6
4. Replace the connectors removed in Step 1 on the end of the composite cable. Note: Pay attention to the correct cable connections. Incorrect wiring at the connectors may cause damage to the equipment. Input connector Power supply connector Input/Output connector Terminal No.
PAGE 7
5. After the suspension pipe (prepare separately) has been installed, pull out the cable from the lower end of the pipe, then connect it to the composite cable. The pipe thread is compatible with NPT1-1/2. Note: Be sure to seal and insulate each connection of the cable with waterproof tape. Suspension pipe Suspension pipe (NPT1-1/2) NPT1-1/2 6. Waterproof the suspension pipe threads after wrapping the sealing tape (supplied with the C-CC704) around them.
PAGE 8
5. SPECIFICATIONS Finish Dimensions Weight Stainless steel ø120 x 31.5(H) mm (ø4.72" x 1.24" (H)) 300 g (0.66 lb) Note: The design and specifications are subject to change without notice for improvement. • Accessories Camera mounting screw ............................ 4 Waterproof washer ..................................... 4 Cable bushing ............................................ 1 URL: http://www.toa.jp/ Ver. 1.