SR601 Rock Speaker SR601 Rock Speaker O W N E R ’ S M A N U A L
TANNOY SR601 1. 0 WA RN I N G S 1. 1 I mp o r t a n t Sa fe ty In str u cti o n s Before using your SR601, be sure to carefully read the applicable items of these operating instructions and the safety suggestions. • Read these instructions. • Keep these instructions. • Heed all warnings. • Follow all instructions. • Refer all servicing to qualified service personnel. The Tannoy SR601 Rock Speaker has been designed to resist weather and withstand environmental conditions.
SR601 O W N E R ’ S M A N U A L C O NT E NT S 1.0 WARNINGS 2 1.1 Important Safety Instructions 2.0 INTRODUCTION 5.0 CONNECTIONS 5.1 Wire Runs 5.2 Polarity 3 2.1 User Responsibility 2.2 Speaker Damage 4 3.0 UNPACKING 4 4.0 SOUND COVERAGE & SPEAKER PLACEMENT 4 4 5 6.0 TECHNICAL DRAWINGS 5 7.0 MAINTENANCE 6 8.0 TROUBLESHOOTING 6 9.0 WARRANTY 6 10.0 TECHNICAL SPECIFICATIONS 7 2.
TANNOY SR601 2 . 1 US E R RE S P O NS IBILITY 2 . 2 S p e a ke r Da m a g e If you hear obvious distortion from the speakers. Immediately lower the volume level of your amplifier. Those sounds often indicate that either the amplifier or the speaker is being over driven and damage can result in playing your source material at high volume levels for prolonged periods of time. You should also avoid using extreme amounts of equalization. The grilles are not designed or intended to be removed.
. 0 C O NN E CT IO NS 5.2 Polarity Caution: Do not attempt to connect the speakers to any source or amplifier that is turned on. Be sure the source or amplifier is off prior to connecting the speakers. Parallel or series wiring is commonly acceptable for the SR601 rock speaker to gain correct amplifier loading. Avoid series wiring your SR601 speakers with any other speaker type or brand.
TANNOY SR601 7. 0 MAI NT E NA N CE The Tannoy SR601 Rock Speaker has been designed to resist weather an withstand environmental conditions, there are precautions you should take to optimize the long term life and performance of your SR601 speakers. Keep soil, debris and woodchips from covering the speaker grille. If debris accumulates on the grille, it can easily be rinsed away with a garden hose under low water pressure. Do not spray water directly into the face of the grille.
SR601 Rock Speaker 1 0 . 0 T E CH NI CAL S P E C IFICATIO N S SR601 Rock Speaker System SR601 Frequency response (1) 80Hz - 20kHz (+/-5dB), (-10dB) 60Hz Dispersion Characteristics Directivity Index 1kHz 4.2 2kHz 6.1 4kHz 10.1 8kHz 7.0 16kHz 9.8 Q 1kHz 2.6 2kHz 4.1 4kHz 10.3 8kHz 5.1 16kHz 9.
01.17.07 R2.0 T: +44 (0) 1236 420199 F: +44 (0) 1236 428230 E: enquiries@tannoy.com Tannoy North America T: (519) 745 1158 F: (519) 745 2364 E: inquiries@tannoyna.
