Manual

To connect speakers to 4-ohm output (UNBALANCED DIRECT OUTPUT)
(P-906MK2/P-912MK2)
4-ohm
Loosen the screw.
Place the impedance switch in 4-ohm position.
Tighten the screw.
(P-924MK2)
Remove shorting bar.
4-ohm
Rack Mounting
To mount the amplifier in a standard 19" equipment rack, use the optional MB-25B, MB-35B rack mounting
bracket.
Remove 4 screws
securing case.
MB-25B (P-906MK2, P-912MK2)
MB-35B (P-924MK2)
Fix the brackets with attached 4 screws. The length
of screws should not exceed 12mm (1/2").
PF-511 perforated panel (1-unit size)
Use the perforated panel PF-511 to provide space for ventilation,
when two or more units are mounted in an equipment rack.
Contact your local TOA dealer for the perforated panel PF-511.
Amplifier
– 7 –