User's Manual

TK Home Solutions B.V. User’s manual 1060661 Call module
Reference: 003 – 1060661 Call module user’s manual partially page 6 of 6
Version: A.2
State: Released
1.4 Accepting incoming calls
The landline is connected to the Call module. An incoming call can therefore
also be accepted while using the stairlift.
When there is an incoming call, the Communication Module produces a ring tone.
Accepting the call is done as follows:
1. Briefly press the yellow alarm button once. The connection is now established.
Speak in the direction of the alarm button to communicate.
The call can be ended by pressing the yellow alarm button for 1 second.
1.5 Error codes
LED colour
Sound
Cause
Flashing red
None
Not connected to a base
station or no base station
selected
Flashing red
Two short beep sounds,
not repeating.
CM power supply is lost or
backup battery is charging
Flashing green
Two beep sounds,
repeating every 2 minutes
The CM tries to reconnect to
the registered base station
When calling, flashing red
Two beep sounds, 1
second pause, two beep
sounds, not repeating
No telephone numbers
programmed
Green (after trying to call)
None
No telephone line present
For other questions, please contact your supplier.