Instructions / Assembly

22
FP35094REV1.0
MAINTENANCE
• Before performing any maintenance always disconnect propane gas tank.
• Keep the heating item free and clear from combustible materials.
• Visually inspect burner for obstructions and keep tank enclosure free and clear from
debris.
• Use a soft brush to get rid of the mild stains, loose dirt and soil after the burner and pumice
stones/lava rocks/LavaGlass™ are completely cooled down. Wipe down with a soft cloth.
• Harsh weather conditions may cause stubborn stains, discoloration and possibly rust
pitting.
• Permanent damage may occur if powder or solvent comes in contact with painted or
plastic components on this heating unit.
• Keep the heating unit stored away from direct sunlight.
• If storing this unit inside, disconnect the propane gas tank from the gas valve.
• Not using manufacturer approved or supplied parts/accessories may result in a defective
condition and void the warranty of this heating unit.
• Always place the lid (if applicable) or protective cover on the heating item when not in
use.
Envirostone™ Surface Care
Our Envirostone™ material has been sealed with a patented treatment to prevent staining
and moisture absorption, but it does require proper maintenance to ensure the integrity
of the surface. Please see below for recommendations on maintaining your Envirostone™
surface for years of pleasure:
• Clean any spills immediately to prevent permanent Envirostone™ surface staining or
damage. Blot any liquid spills with a clean, dry cloth to avoid spreading of the spill to the
rest of the table. Clean your Envirostone™ surface with a soft, clean cloth or sponge. Mix
a solution of warm clean water and mild dish soap to remove any surface dirt or mild
spills. Rinse all soap solution off of the tabletop and dry completely to avoid water spots.
Regularly cleaning the Envirostone™ surface will aid in a longer lasting product.
• Do not use petroleum-based or abrasive cleaning products. Do not use any harsh brushes
when cleaning the Envirostone™ surface.
• Do not slide products across the Envirostone™ surface to avoid permanent scratching and
damage.
• Always use protective mats such as coasters or placemats when eating on an
Envirostone™ surface. These protective products will help absorb sweating on cool
beverages and will block out any heat rings from appearing beneath a warm mug or
plate. When placing hot dishes on an Envirostone™ surface, always use mats or hot pads.
• Envirostone™ surface must be covered at all times when not in use. Cover your product
with an outdoor furniture cover when not in use to protect it from the elements. Store your
product indoors during winter months. Avoiding extreme cold temperatures will prevent
cracking of the tabletop.