Use and Care Manual

FP35077REV1.0

Loading of Gas Tank into the Fire Table

The Fire Table has a Door. Remove the Door and leave

the Door on the oor.

Inside, you will see a Metal Stand with pre-attached

Wing Screw/ Nut.

Proceed to Unscrew the Wing Screw/ Nut

Load the Gas Tank/ Gas Cylinder as indicated by

the bold black arrow.

Place the Tank/ Cylinder gently and snugly into the

Metal Stand.

Position the Wing Screw/ Nut in place.

Turn the Wing Screw until it fully tightens into the Nut.

The Gas Tank/ Gas Cylinder is now secured in

place.

Connecting the Fire Table to the Gas Cylinder

Fig. A

Fig. B

Black coupling nut

turn clockwise to

connect.

Regulator

Cylinder valve

Pressure relief valve

Bleed -off valve

Turn clockwise

to reseal

Step 1 : Plug the Black Coupling Nut on the

regulator to the Cylinder Valve.

Step 2 : Turn the Black Coupling Nut

CLOCKWISE until fully locked into position.

Step 3 : Check for leaks by brushing a soap

and water mixture on all connections.

Turn the gas supply on. If extra large

bubbles form on any connection there

may be a leak. If you smell gas or a leak is

discovered, IMMEDIATELY turn the gas valve

off, disconnect Propane Gas tank.

Do not use the appliance until the leak is

repaired.