Product Manual

4. For vinyl or other types of lap siding, level XCHANGER and trace outer flange on XCHANGER housing and trim siding back
enough to install J channel or appropriate flashing, (See Diagram E).
5. Insert (6) push clips through embossed holes of housing. Direction of clips must be as shown, (See diagram F).
6. Insert XCHANGER housing through wall with fan openings facing down, (See Diagram G).
7. Level housing and secure to wall using (4) screws, (See Diagram H). Install J channel or appropriate flashing around XCHANGER
mounting flange. Do not cover up mounting flange or hood will not snap on push clips, (See Diagram I).
8. Carefully align and then snap hood on (6) push clips. Apply a bead of caulking around hood and wall, (see Diagram J).
9. insert screen in hood. Bend screen slightly before inserting if screen is loose, (See
Diagram K).
10. Assemble mounting bracket, (See Diagram L). Attach assembled bracket to bottom of
XCHANGER. Mark bracket mounting location on wall with a slight upward pitch in rear
of XCHANGER and connect to wall using provided wall anchor, (See Diagram M).
5
DIAGRAM F
DIAGRAM E
DIAGRAM G
INSERT (6) PUSH CLIPS THROUGH EMBOSSED
HOES OF HOUSING. CLIPS MUST BE INSERTED AS
SHOWN.
LEVEL XCHANGER AND TRACE FLANGE. TRIM
SIDING BACK SO XCHANGER FLANGE CAN BE
MOUNTED FLUSH TO EXTERIOR.
INSERT XCHANGER HOUSING THROUGH WALL.
FAN OPENINGS MUST FACE DOWN.
DIAGRAM H
DIAGRAM I
DIAGRAM J
LEVEL HOUSING AND SECURE TO WALL USING (4)
SCREWS.
INSTALL J CHANNEL OR APPROPRIATE
FLASHING AROUND XCHANGER MOUNTING
FLANGE.
CAREFULLY ALIGN AND THEN SNAP HOOD ON
(6) PUSH CLIPS. APPLY A BEAD OF CAULKING
AROUND HOOD AND SIDING.
DIAGRAM K
DIAGRAM L
INSERT SCREEN IN HOOD. BEND SCREEN SLIGHT-
LY IF SCREEN IS LOOSE AND REINSERT.
ASSEMBLE XCHANGER MOUNTING BRACKET.
DIAGRAM M
ATTACH MOUNTING BRACKET TO BOTTOM OF
XCHANGER. INSTALL BRACKET SO XCHANG-
ER HAS A SLIGHT UPWARD PITCH N REAR.
FAN OPENINGS FACING DOWN