User's Manual

13
Operation
- Power control of main unit
Turn on the main unit
❶ To turn on the main unit, connect AC adapter jack to AC
adapter connection terminal on the rear panel of main unit.
❷ Plug in the AC adapter.
❸ Press the power switch on the rear panel.
❹
Check if the lamp on the front
panel is ON in red.
❺ Check the product's initial image
comes out on TV screen.
• If you don't get image or sound, check the connection of TV,
amp. or audio.
• Check if the external input mode of TV, amp. or audio is
correctly set and refer to the user's manual for setting
external input.
Turn off the main unit
❶ Switch off the button on the rear panel of main unit.
❷ Unplug AC adapter.
❸ Disconnect the AC adapter jack.
• Before turning off the main unit, switch off the Microphone
first.
(To refer to the 14 page, Turn off the Microphone)
14
Operation
- Microphone power / Microphone channel
Turn on the microphone
Take the Microphone toward the receiver of main
unit and press Microphone
button. Microphone
is ON with HELLO message on the Microphone
LCD window.
Do not press Microphone 1 and 2 button same time !
Because main unit or Microphone may not work due to
frequency.
Turn off the microphone
Take the Microphone toward to receiver of main
unit and press Microphone
button for 3
seconds. Microphone turns off with OFF message
on LCD window.
Microphone channel set
Ji-200 Microphone has a total of 4 channels. If you don't get clean
sound, you can change the channel to optimize the sound.
❶
Press the
button on the Microphone.
❷
Microphone LCD
indication
Relevant channel is indicated on the
Microphone LCD window and screen.
❸
If you press
button again and again, you can get
CH1~CH4 one by one.
❹
By pressing
button, choose a channel with best sound.
When using Microphone C
1
, Microphone C2 both, set them
in the same channel.
Microphone channel is incorrect.
(Gray channel image and check
ima
g
e comes u
p
.
)
Microphone channel is correct.
(
Green channel ima
g
e comes u
p
.
)
15
Operation
- Selecting / Playing / Booking
Basic play
Microphone LCD
indication
❶ Find the number of the song to sing
and insert it with number button
(
~ ) of Microphone or remote
controller.
❷ Press
button and sing.
❸ Once you finish singing, you will get
your score.
Stop during playback
❶ When stopping the on-going song, press
button.
❷ The song stops and you will see the score of the song done.
Booking
Before singing or during playback, you can book you song to sing
up to 100 songs.
❶ Find the number of the song to book
and insert it with number button
(
~ ) of Microphone or remote
controller.
❷ Check the title on the top of the
screen and press
button.
❸ You will see the message Booking is
Done on the screen.
❹ Your booked song is seen in the
waiting list and if two or more songs
are booked, you will see their numbers.
Cancel the booking(RSRV)
❶ Whenever you press
button, you can cancel the booked
songs one by one from the last booking.
❷ If you insert booked song number and press
button, you
can cancel the song.