User's Manual

10
Names of parts
-Remote controller
Remote controller
Keep following instructions to avoid electric discharge or
damage of battery.
■ When inputting the battery in the Microphone. check its poles (+/-).
■ Make sure to use the batteries for remote controller of (AAA) size.
■ When changing the batteries, make sure to change both of them.
■ When you don't use the Microphone for a long time, keep the
battery out of Microphone.
When to change the battery
■ If the Microphone work in a shorter distance from the set, the
battery is going dead. You should change the batteries.
How to change the battery
① Pressing the groove,
pull up the cover.
② Insert the battery
correctly.
③ Close the cover.
Option
Additional Chip Microphone C2
11
Connection
-Audio and video connection to TV
❶ Connect video output(yellow) of Ji-200 main unit and video input
(yellow) of TV with yellow cable among video audio cables.
❷ Connect audio output(left-white/right-red) of Ji-200 main unit and
audio input(left-white/right-red) of TV with white/red audio cable.
❸ Connect AC adapter jack to adapter connection terminal of rear
panel of main unit and plug AC adapter in.
❹ Turn on the switch of rear panel of main unit. Check the red
lamp of front panel is ON.
❺ Change the TV input mode into the mode of connected video
input terminal.
Refer to the TV user's manual for the detailed explanation on
TV input mode and external device connection.
❻ Select a song after you get
Ji-200 initial image in TV
screen. You will see letters
appearing.
12
Connection
-Separate connection of Audio·Amp.
❶ Connect video output(yellow) of Ji-200 main unit and video input
(yellow) of TV with yellow cable among video audio cables.
❷ Connect audio output(left-white/right-red) of Ji-200 main unit and
audio input(left-white/right-red) of audio or amp. with white/red
audio cable.
❸ Connect AC adapter jack to adapter connection terminal of rear
panel of main unit and plug AC adapter in.
❹ Turn on the switch of rear panel of main unit. Check the red
lamp of front panel is ON.
❺ Change TV input mode into the mode of connected video input
terminal, and change audio or amp. input mode into external
input(or AUX).
Refer to the TV user's manual for the detailed explanation on
TV, audio and amp. input mode and external device
connection.