User's Manual

- 53 -
User’s manual_v01
5.5 Filter
Select the class based on the type of bandwidth (Channel or band) that will be used.
Class A activates the Channel selective option and Class B enables the Band-Selective function. Check and select
the type and move on to the next step.
When choosing Class A, totally 32 channels will be activated and you can set the frequency, bandwidth of the
each channels, and you also can enable or disable specific channels.
To simplify the channel setup process, you can use ‘Quick Config’ function to input individual channel info.
If you enter the 1
st
channel & offset, the rest of the channels will be defined automatically with the same amount
of frequency offsets.
Check and select the items before moving on to the next step.
Figure 5 - 5 Install wizard/ Filter1