User's Manual

- 34 -
User’s manual_v01
4.4.2 Dashboard _ Alarm & Dry Contact
These are the main alarm items that can be officially listed from the equipment, and reference values can be
set for each state and alarms.
It shows GREEN for normal range and RED for the out of range, and you can adjust the threshold values
depending on the situation.
Figure 4 - 6 Dashboard _ Alarm & Dry Contact
4.4.3 Dashboard _ Dry Contact
This function is used to check the status of the system and the external alarm box by connecting them with
dedicated cable. You can specify the type of cable and the alarm entries you would like to use for each pin port.
 Donor Antenna Malfunction
 Battery Charger Failure
 Low Battery Capacity
 Normal AC Power
 System Component Malfunction
 Active RF Emitting Device Malfunction
 Loss Of Normal AC Power
 Reserved