User's Manual

- 31 -
User’s manual_v01
4.2 WEB GUI CONNECTION
User can choose the type of class and the type of filters for each frequency band by using Install wizard.
Step 1:
Connect ETHERNET port to RJ45 port on user laptop with the supplied RJ45 cable to set up a physical
connection.
Step 2:
Local connection terms regarding Internet Protocol version 4 (TCP/IPv4) is required to set up as following ;
Item.
Description
IP Address
192.168.0.1
Subnet Mask
255.255.255.0
Gateway
192.168.0.1
Table 4 - 1 Local connection terms
Step 3:
Open a browser window and enter the IP address of the device in the address bar. Chrome browser is
recommended for optimal resolution.
Step 4:
After entering ID and password, press the Sign in button. Please contact system administrator for ID and
password. (default ID: Admin)
Figure 4 - 2 WEB GUI/ Log in menu