User's Manual

- 22 -
User’s manual_v01
2.2.4 ETHERNET
It is strongly recommended that PSR must be connected to the Internet via ETHERNET port 24/7 for
maintaining the best quality of service by using WEB GUI.
The GUI port can be used to communicate directly with PSR using an RJ-45 crossover cable. The waterproof
cap must first be unscrewed to gain access to the GUI port.
Figure 2 - 6 ETHERNET Port
Ethernet
M20 RJ45
1
GND
2
TX+
3
TX-
4
RX+
5
NC
6
NC
7
RX-
8
NC
9
NC
10
GND
Table 2 - 5 Pin description/ ETHERNET
2.2.5 BLUETOOTH ANT
SMA interface is reserved for connecting external Bluetooth IoT device when it is available, depending on the
situation.
Figure 2 - 7 BLUETOOTH ANT