User's Manual

- 57 -
User’s manual_v01
5.8 Check ISO
Measure the Isolation value.
1. Press the "Reset" button to disable both Downlink & Uplink amplifiers.
2. Turn on the Downlink amplifier only and check the Isolation value.
Or turn on both Downlink and Uplink amplifiers and check Isolation value.
Installer can choose either one of above check options.
Recommended isolation value is greater than 120dB
If the check result is more than 120dB, the button color will be changed to green.
Checking isolation is not a must at this stage and installer may skip this page.
Figure 5 - 11 Install wizard/ Check ISO