User's Manual

- 56 -
User’s manual_v01
5.6 Target
Set the key values of the equipment, such as Gain, ALC Level, and Sleep Mode. The values must be carefully
chosen for proper working, and you also can change the values after completing the setup wizard. Check and
select the items before moving on to the next step.
Figure 5 - 9 Install wizard/ Target
5.7 Check Input
Measure the input power of the Donor Antenna. Please adjust the antenna position and press the "Self-
diagnosis Start" button to check the Input Power reading which is more than -80dBm is recommended.
If the input power reading is within the recommended range, it will show Green, otherwise Red.
Checking input power is not a must at this stage and installer may skip this page.
Figure 5 - 10 Install wizard/ Check Input