User's Manual

- 41 -
User’s manual_v01
4.5 SETUP
4.5.1 SETUP _ Network
There are 2ways of setting up the network, the wide area (WAN) and the local area (LAN).
IP Address can be setup automatically by using DHCP settings or by manually as well, for both IP Version 4 and
IP Version 6 settings.
Fill in the blanks of IP address, Subnet mask, Gateway and DNS server address each by each. Note that the DNS
server address will not be assigned automatically because it could be changed depends on overall network DHCP
settings. In addition, you could use it as local area purpose by setting it up based on specific local area network
definitions.
Figure 4 - 14 SETUP _ IPV4
Figure 4 - 15 SETUP _ IPV6