Operation Manual

54
Power Button  Select between “Power Off” and “Suspend” when pressing power
button. If “Power Off” selected, the system will completely be
powered off when POWER button pressed. System will boot up
completely from initial stage when next POWER-ON. (COLD-
BOOT)
Disk Format  Initialize the attached hard disk drive.
TV Change Detection  Running Setup Wizard or not when new TV is detected
Broadcast Output  Turn on/ off RF pass-thru when power is off
Set Factory Default  Reset the internal data to original one from factory. It will reset
the TV output resolution, internal settings and database. It will
preserve the application you installed, though.
18.2 Audio and Visual
Video Output  Select video output port.
Resolution  Select resolution of the video output.
Native Frame Rate  Turn On/Off of original frame rate of the source
Cinema Original (24p)  Enable/ Disable cinema frame rate
TV Original (1080i 60Hz)  Enable/ Disable TV frame rate.
Audio Output  Select audio output port and format
HDMI  Audio will output to HDMI port
Digital (S/PDIF)  Audio will output to digital audio port (optical)
Analog (RCA)  Audio will output to analog port (RCA)
For HDMI and Digital (S/PDIF) port, the format of audio can be also configured
such as ANALOG (PCM) or DIGITAL (Compressed). In “Digital Mode”, the output
can be On/Off for each format.